PHASED ARRAY ULTRASONIC TESTING (PAUT)
相控阵超声检测
Course Content:
课程内容:
Principles of phased array inspection; principles of phased array probes; principles of inspection sensitivity; phased array instrument; scanning with phased array probes; calibration and checks; software for data collection and data analysis; principles of data analysis; software familiarity; use of software tools for defect detection and sizing; data analysis; procedures for verification of flaw existence and position;reporting. Typical equipment used on the course: Olympus Omniscan equipment. If your course is equipment specific please contact us to confirm the equipment that will be used for the event.
相控阵检测原理；相控阵探头原理；检测灵敏度原则；相控阵仪器；用相控阵探头进行扫描；校准和检查；数据收集和数据分析软件；数据分析原理；软件熟悉度；使用软件工具进行缺陷检测和尺寸确定；数据分析；缺陷存在和位置的验证程序；报告。课程上使用的典型设备：奥林巴斯Omniscan等设备。如果您的课程是特定于设备的，请联系我们以确认将用于活动的设备。
Course Duration:
培训时长
12 DAYS (phased array theory and data acquisition practical and analysis practical)
12天(相控阵理论与数据采集实践与分析实践)
Entry Requirements:
培训要求
ISO 9712 candidates must be qualified to a minimum of ISO 9712 Level 2 Ultrasonic Testing.
The minimum required duration of training, which includes both theoretical and practical elements, is:
• Level 2 - 120 hours
ISO 9712考生必须具备ISO 9712 2级超声检测的最低资格。
最少所需的培训时间，包括理论和实践两方面，为:
•二级- 120小时
The minimum duration for experience prior to or following success in the qualification examination is:
在资格考试成功前后的最短工作时间为:
• Level 2 - 6 months
•2 - 6个月
Course Objectives：
课程目标:
· To explain the theoretical background of phased array applications
解释相控阵应用的理论背景
· To correctly select probe/wedge to examine welded butt joints
正确选择探头/楔子以检查焊接对接接头
· To calibrate and set up the phased array ultrasonic equipment
对相控阵超声设备进行校准和安装
· To locate and evaluate flaws in the weld body, HAZ, and parent metal lamination
定位和评估焊缝体、热影响区和母材层合层的缺陷
· To analyse scan data for location and size of defects in typical welded butt joints
分析扫描数据，确定典型对接焊接接头缺陷的位置和大小
· To accurately report weld condition
准确报告焊接状况
· To differentiate defects from geometric features
区分缺陷和几何特征
· To compile a written instruction
编写作业指导书
· To meet the ISO 9712 syllabus requirements
满足ISO 9712教学大纲的要求
